This month we’re asking questions of self-described Online guy at Weta Workshop and all round top bloke, Magnus Hjert.

Kelvarhin: Thanks for joining us this month Magnus, as always we’ll start with grammas favourite question…

What was your favourite cartoon when you were growing up?

Magnus: I grew up in Sweden on a rich and varied comics diet consisting of Tintin, Asterix, The Phantom, Spirou et Fantasio, its spin-off Marsupilami, Iznogoud… but my all-time favourite (that I still read) is Tintin.

Kelvarhin: What was your favourite toy as a kid?

Magnus: My Märklin train set… it initially provided much entertainment for my father and uncle, as I believe I was about three when I got it for Christmas. But it was awesome when I was older and could build model buildings etc.

Kelvarhin: Some of the  TORNfolk (Tehanu, Garfeimao, deej and entmaiden) were in attendance to help Weta and the Neonatal Trust break the Guinness Record for most sandcastles built in an hour. They know that they built enough, but Guinness requires a lot of documentation and time to certify the results, and they’re wondering if you’ve gotten the official results from the world record Sandcastle Build last November?

Magnus: I don’t actually know the answer, but I promise I will find out from Martin Baynton, who is the main link between Adventure Wellington and Weta Workshop. I was on that beach myself, covering it on behalf of Weta. The event was organised by Adventure Wellington and Weta Workshop helped out with buckets and quite a few crew, including Richard, Tania and many others.

Kelvarhin: What is your favourite location in NZ?

Magnus: I’ve lived here now for 10 years and I have many favourites. But that’s a bit of a cop-out, so I will try to pick one.  To narrow it down little by little, the region called the Wairarapa is about 90 minutes’ drive away from Wellington and is predominantly a rural area, but with a twist – it’s one of New Zealand’s premier wine regions. Small towns that 50 years ago were as rural as rural can be have blossomed with the increased interest the wine has brought to the region. On the way to my favourite place, you pass through several of these, Featherston, Greytown, Carterton. When you get to Masterton, you take a right and head for the coast. And after driving through orchards and sheep stations, you get to Castlepoint. A Pacific beach community with a spectacular lighthouse and rock formations, a fantastic beach and a camping ground. And very little else. The weather is often unforgiving, but lying in a tent, listening to the ocean… it doesn’t get much better. Oh – I just realised you probably meant shooting location? Well, other than Hobbiton which is truly AWESOME, a favourite is the Dimholt Road/Paths of the Dead at Putangirua Pinnacles in… you guessed it: The Wairarapa.

Kelvarhin: What are your most favourite places, of all the places you’ve been to in the world?

Magnus: Monterey, California. Montpellier, France. London, England (lived there for 7 years). Copenhagen, Denmark (being from Malmo in Sweden, Copenhagen is a natural place to hang out – back then it was a 45 minute boat trip away. Now there’s a bridge…). And Wellington – on a good day…

Kelvarhin: What movies or television shows are you into right now, apart from The Hobbit?

Magnus: Star Trek: Into Darkness was awesome – I went with a band of colleagues and everyone was pretty much in agreement it was a great film. With two kids of 6 and 10 years, I watch a LOT of ‘children’s’ flicks – like Wall-e, How to train your Dragon (and Riders of Berk) and love it, but Game of Thrones, Boardwalk Empire, House MD, Doctor Who, Sherlock and even the occasional UK detective show/murder mystery re-run like Midsomer Murders, Morse, Miss Marple, Hercules Poirot… I’m easy to entertain…

Kelvarhin: I’m a child of migrants, and I know you’re originally from Sweden, so I was wondering what inspired your move to New Zealand?

Magnus: I was dragged here kicking and screaming by my Kiwi wife… nah, it was actually the other way around. I get itchy feet staying in one place for too long and when we were living in London (where we met and wed) and expected our first child, we decided there were healthier places to bring up children than south London, so we chose New Zealand. Thinking we’d only be here for 4-5 years and then perhaps go to Sweden (where all my family is). But then I got my job at Weta – as close to my dream job as I’m ever likely to get – and we’ve now decided not to up-root the kids, but stay here for at least as long as they want to stay. Then we’ll see.

Kelvarhin: What was the most difficult thing about organising Wetas surprise for TORn’s 10th Anniversary?

Magnus: Getting everyone to the same courtyard at the same time. Gino from Weta Digital down the road, Richard Taylor from somewhere in the building, Guillermo del Toro from 3 Foot 7 and then getting the crew to pick up some props and waving them around. We had many false starts on different occasions, but in the end we got it together. Woohoo! Man, that seems like a long time ago now… I was very nervous directing Guillermo del Toro, but he was very good about it.

TORn 10th Anniversary Weta Video

Kelvarhin: How long have you been working for Weta Workshop and how did you come to be involved with them?

Magnus: I’ve been here since 2008 and I owe it to my sister-in-law who found the ad in the paper…

Kelvarhin:  Working for Weta sounds great, but being a marketing manager sounds like hard work… is the line between being on the job and dreaming sharp or fuzzy? Is there even a line?

Magnus: That’s a great question… I’m gonna have to think about that one… Right – I’m back after having answered a few other questions in the meantime. The answer is – there is no line… my job is a constant intertwinement of fantasy, fans, fiction, collectors, artists, logistics, writing and just saying ‘awesome’ a lot. Weta is not a normal workplace – we who work there tend to forget.

Kelvarhin: Within your position at Weta, you must have been involved with some very surreal situations (perhaps meeting certain people, taken part in certain events and so on). What is your most memorable moment?

Magnus: There are many… in my first week, one of the Workshop technicians, Jordan, drove up and down the road outside on his rocket powered bicycle. A few months later I was recording a sound bite with Bill Farmer (Goofy since 1986) on a podcast and suddenly Michael Winslow (officer Larvell Jones in Police Academy) chips in with a Mickey Mouse impersonation… And meeting Sir Ian McKellen – again for a podcast interview… it’s all a bit surreal in hindsight, but while you’re doing it… it’s fantastic.

Kelvarhin: What item do you like the most of all the items made by Weta? And why?

Magnus: Ooooooh – that’s a tough one. The Minas Tirith shooting miniature – I have never seen it in real life, but the impact it had on me in LOTR when I first saw it on screen… man! Barad-dûr and Orthanc likewise – I’ve seen both of them outside David Tremont’s workshop while he was working away on the collectible models. Of the things you can take home… Peter Lyon’s swords… probably Andúril… words cannot describe how epic they are and how powerful you feel with one in your hand.

Kelvarhin:  I have heard workers from Weta get a chance to buy the things they make (the collectibles). Have you ever not bought an item and later regretted that you didn’t get it? If yes, what was it, and why do you regret not getting it?

Magnus: Yes – I admit to being a complete sucker for Greg Broadmore’s rayguns… and my favourite is the Goliathon 83, which is now sold out. While it was still in stock, I couldn’t afford it. But if I ever get a chance to buy one…

Kelvarhin: What is it like seeing all these cool Collectibles before the fans get to see them? Also, how hard is it to hold that from the world?

Magnus: A) Orgasmic. B) Extremely.

Kelvarhin: If you were making a car commercial, what Weta Workshop items would you include?

Magnus: Rayguns – ‘Vorsprung Durch Technik’. It’s a mantra in Ingolstadt as well as at Grordbort Industries. Although it would be in English undoubtedly. ‘Advantage through Technology’.

Kelvarhin: And lastly, if you were a dwarf in Thorin’s Company, which one would you be?

Magnus: Easy – Bombur. A little known fact is that I have “arse-modelled” for our Bombur collectible, showing the sculptors what it looks like when a fat guy runs… up and down the Weta Workshop car park. And Leaflock from The Shadow and Flame’s Weta collectors’ forum actually turned me into Bombur in the S&F Christmas card for Weta. So I feel a strong affinity with the guy. I have included the image Leaflock made.

As always thanks to all our message board regulars, DanielLB, SirDennisC, Ataahua, Elessar, Brethil, elaen32, entmaiden, dernwyn, Kaede, grammaboodawg and Rosie-with-the-ribbons, for this month’s questions.

If you would like to ask any questions yourself, just head over to our Message Boards, the sign up process is pretty painless. A lead post for questions is made at the beginning of each month on the Main board. Or you can just check Main for each months interviewee and email me your questions at kelvarhin@theonering.net.

Till next time from TORn’s resident Tiger.

Kelvarhin

Shows

We had a wonderful time in April, attending 3 shows in Melbourne and the Gold Coast of Australia, and our first visit to CalgaryExpo in Canada. It was exciting to meet some new and old Flamers in person for the first time. We were especially grateful for the kind donations of chocolate for the crew !
Most of us just got back to work on Monday, a bit tired, but ready to get going again. And of course, we are only 2 months away from the Big Show; San Diego Comic Con. Time flies, we can’t wait ! We will be in the same booth space (3513B) as last year. This has now become our own Weta booth, we are no longer sharing someone else’s space. We will have our largest ever team of Weta crew at Comic Con this year. We’ll be announcing names soon. Please come and say Hi We are shipping out a container full of goodies to San Diego at the end of May, full of confidential, new stuff. We still have lots of work to do, as there are always a handful of items packed in at the last minute.

The Hobbit – 1/6th scale polystone range

We have now launched the first seven pieces in the 1/6th scale range: Thorin, Gandalf, Bilbo, Dwalin, Balin, Bombur and Gollum. Thanks so much to all of you who have supported this range, we consider these to be the best quality sculptures we have created. This will be our signature line for The Hobbit trilogy of movies and we have several more outstanding pieces in production. A lot of thought has gone into the poses, and how the various characters could be displayed together. We expect this will become clearer over time. We will most likely unveil the next sculpture in the range in July.

Some of you have asked why there are no creatures launched yet ? The reason is that most of the creatures are created in digital form for the films, and the digital work is normally finalized very late in the film making process. So therefore we could not start work on these creatures until very late last year. But never fear, they are coming !

The Hobbit – Environments

We had hoped to have launched an environment by now. We were actually building a few pieces last year. But once the decision was made to change from 2 to 3 movies, we had to put them on hold until the second movie is released.

The good news is that we do have 2 new environments in production now, so you will be seeing them at some stage soon.

The Hobbit – New Polystone Product Ranges !

Over the next few months, we will be launching some new smaller scale pieces, priced under US$100, including a few special pre-releases from the upcoming movie The Hobbit: The Desolation of Smaug. Look out for these at Comic Con!

The Hobbit – Prop Replicas

Our Staves have been extremely popular. The first production of both the Staff of Radagast the Brown and the Staff of Gandalf the Grey, sold out even before they arrived in our warehouses. The second and final production run will take place over the next few months and we hope to release these final pieces before the end of 2013. We strongly suggest pre-ordering to ensure you don’t miss out.

The Key to Erebor is our highest selling item. We have sold out our stocks twice and are struggling to keep up with production

Daniel Reeve has had a great time creating hand made Contracts and Maps.

Jewelry from Middle-earth

Our new range of Jewelry from Middle-earth has been a huge hit, especially The One Ring in gold plated tungsten carbide, created by Jens Hansen Gold and Silversmith. We continue to struggle to keep up with supply for this item, the Evenstar and the Elven Leaf Brooch

We have a new Stone Pendant launching in the next week. Keep an eye out for it

The Hobbit – Maps and Art Prints

We now have a room in our office dedicated to storing tubes with all the Maps and art prints created by the artists who worked on the movies. We will continue to expand this range and would be grateful for a poll to vote on the scenes you’d like to see from LOTR and The Hobbit.

If you are coming to Comic Con in July, this would be a great opportunity to get some of these art prints signed.

You can also expect to see something new from Daniel Reeve soon too

The Lord of the Rings

There are a couple of items in production from LOTR.

The Fellowship of the Ring – Set 2 starts arriving in our warehouses over the next month, and will be followed up by Set 3 in a few months time. All three sets look fantastic displayed together, with a mirror set behind them, as we have done in the Weta Cave

We will also be releasing a new sculpture of Arwen soon, as part of the range of smaller scale pieces; Gollum, Gandalf and Strider

Next shipment

Our next shipments arrive in our 3 warehouses in the US, UK and NZ over the next month, including new pieces such as:

• The Fellowship of the Ring – Set 2
• The Pipe of Fili the Dwarf
• The Staff of Gandalf the Grey (already sold out)
• Gollum Enraged

Changing Warehouses in the US

In late May / early June, we will be changing our warehouse in the US. So if you are planning to make any orders in the near future, we recommend making your order in the next 2 weeks.

And for customers in North America, we will be announcing a range of special offers early next week, to help us reduce our inventory before we move to the new warehouse. Watch out for this in our next newsletter !

Cheers

Tim

Weta Goes to Calgary

Woohoo – Weta will be attending the Calgary Comic and Entertainment Expo 2013.

When: April 26-28, 2013

Where: The BMO Centre, Stampede Park, Calgary, Alberta

The Calgary Comic & Entertainment Expo is the only festival in Calgary where you can get your sci-fi, film, television, fantasy, horror, comic book, gaming, and animation fix all in one incredible weekend. Join 60,000 other fans for this celebration of pop culture.

We are absolutely thrilled to have been invited by the organisers and we’ve been eagerly packing cool stuff from Middle-earth and beyond onto trucks and into planes to have a great range available to purchase at the Weta booth. Our booth number is Z-603 (Please Note: due to some international systems issues, we will only be able to accept cash at our booth – we cannot accept any payment cards).

This is our first ever show in Canada and we can’t wait to hook up with our fans and friends at the convention.

Richard Taylor and David Tremont will be at the Weta Booth along with Ri, Tim and Stacy.

This year the Calgary Expo will feature a variety of guests from different industries. From film and television stars to make-up artists, writers, comic book creators, cosplay specialists and much more – the Calgary Expo covers every corner of pop culture imaginable!

There will be over 600 exhibitors, artists, and special guests, all in one spot!

Bombur is the brother of Bofur and is also the cousin to Bifur who are both members of the party whose goal is to reclaim The Lonely Mountain from the Dragon Smaug. Bombur is a rather large Dwarf and as the traveling party makes their journey this will present challenges. However, we will also see that you can’t judge a book by its cover with Bombur.

PACKAGING

The overall graphic layout for Bombur’s box stays the same as we’ve seen with previous entries in the line. Per the format we’ve come to know the front of the box gives you a great shot of Bombur, graphic work for the title of the movie, and of course the Weta logo. The sides of the box for Bombur also present a familiar format with different looks at the statue. While the other side of the box presents some of the various products you can get for The Hobbit: An Unexpected Journey line of collectibles. The back of the box contains a great story on Bombur as well as information regarding details of the character and statue. The Styrofoam on the inside is typical with what we’ve come used to getting with these statues.

SCULPTING

Greg Tozer is at it again but this time he had some help from fellow sculptor Scott Spencer with their combined efforts making a great statue. Bombur is another case of the statue looking spot on to the actor and the character we saw on screen. One of the things I think that might have been a challenge for sculpting Bombur was the long U shaped beard making sure it looked like real hair, and it was done really well in coming out looking just like that.

The outfit is probably the simplest of all the Dwarves so far but it done equally as good as those Dwarves. Unlike the previous Dwarves Bombur’s outfit is cloth based with only his boots being leather. The job making the outfit look like cloth was done successfully. So much so that Bombur looks very much like a pauper, which is fitting considering the Dwarves of Erebor situation following Smaug’s attack. Bombur was the cook of the group and as we saw in the movie really had no weapons with the exception of his cooking gear. So for this statue you get Bombur running away from what I imagine is the Goblins of Goblin Town with his giant ladle. There is a sequence where you see him running holding this so that is where I draw my inspiration from as to the sequence of events for this piece.

A fun note for anyone who wonders how poses are created or who might help create them. If you post or lurk on the forum The Shadow and Flame you know the username WetaBloke. Well, he was the inspiration in being asked to run the parking lot of the Weta Cave and then turned into the satue we have in our collections.

PAINT

Bombur continues the streak of very well painted statues from Weta Workshop. The skin tones use the proper paint mixture to not only make the statue look like a shrunken Dwarf. Making the outfit look like worn cloth must have been a challenge for the paint department but it was a challenge they met to the high standards we have as collectors. Bombur very much comes out looking like someone who has the proper skin tone you saw on screen and the worn outfit of someone who has lived a hard life since leaving Erebor. The ladle that Bombur carries looks fantastic as well and very much matches the prop on screen.

Overall

Bombur retails for $249, which is in line with most of the statues so far in the line. I will say that while I’m not a giant fan of the character I love the statue and find it to be another hit for Weta. He looks great and helps create a really great looking Hobbit display. I want to add that with every release in this line Weta is just continuing to show how great they with these statues.

SPECIFICATIONS

Bombur is the first limited edition statue of the line (minus the Comic-Con Exclusive Thorin). His edition size is just 1000 pieces and for now he is in-stock ready for purchase.

Dimensions:

9.3″ x 9.1″ x 5.9″ (H x W x D)
23.5 cm x 23 cm x 15 cm

Weight:

3.4 lbs (1.9 kg)

PHOTOS

Here is how Weta describes Orcrist:

Forged long ago in the lost Elf kingdom of Gondolin, Orcrist, the ‘goblin cleaver’, was a legendary blade, well known to the wise of Middle-earth and infamous among their enemies. Having disappeared for centuries, the sword would reappear in, of all places, a Troll hoard, where, among the detritus and ruin, it catches the eye of Thorin Oakenshield. To the Dwarf, well versed in the crafting of fine weapons, it is a sword of peerless craft, but it is Elrond, lord and lore-master of Rivendell, who is able to name the blade and tell Thorin of its prestigious lineage. No finer sword could a king of any race wish for.

Orcrist was designed by Weta senior concept designer Paul Tobin and made at Weta Workshop in New Zealand for The Hobbit: An Unexpected Journey by Master Swordsmith Peter Lyon. The fifth sword in Weta’s Master Swordsmith’s Collection, Orcrist takes swordmaking even further than previous swords in the series. The first single edged blade in The Master Swordsmith’s Collection, it encompasses a multitude of sword making, metal crafting and wood working techniques. It joins the previous swords in the series: Andúril, Strider’s Sword, Glamdring and the most recently launched sword, Sting – still available to order!

Orcrist is made with the same attention to detail that the swordsmiths of the lost realm of Gondolin would have required. Peter Lyon took Paul Tobin’s design and created a piece of art and a usable weapon wrapped in one. The blade is made from tempered spring steel and the dragon’s tooth grip is cast from CC60 urethane, painted and sealed under resin. On the cross is the name “Orcrist” etched in runes and the gently curvaceous blade, ground from spring steel, features etched elven runes stating ”The Serpent’s Tooth”. On the pommel are four cubic zirconia gemstones inlaid.

The scabbard is made from a combination of white oak and steel and connects to the leather belt with leather straps and buckles. The inscription translates as “Born from the Maws of Dragons I am Always Hungry and Thirsty”. The belt is made from embossed leather with steel buckle, loop and tip. It features straps for attaching the scabbard. Thorin wears his sword on his back and this belt is designed to be worn over the shoulder. This sword and its accessories are the absolute epitome of craftsmanship.